Drying of inorganic powders with vacuum and refrigeration technology

For the manufacture of tools with additive manufacturing (3D printing), very dry metal powder is required. To achieve the required degree of dryness, the powder is dried with a combined vacuum and refrigeration process. The process facilitates effective, even drying at low temperatures. With the aid of a protective atmosphere comprising inert gas, the metal powder can be shielded against the introduction of moisture or reaction with the ambient air.

Vacuum drying process improves fluctuating metal powder qualities of powder manufacturers

By means of the vacuum process, all inorganic powder materials, including metal powders such as aluminium, titanium, and tool steel alloys can be dried. The process involves the evaporation (sublimation) of the water adhering to the metal powder at low temperatures and pressures. During the vacuum drying process, a vacuum and uniformly low temperature must be produced in all of the metal powder to be dried. This is the only way to achieve workpieces of constantly high quality. 

Metal powder drying in hermetically sealed system

In vacuum drying, a vacuum pump sucks the moist air out of the drying tank.
With the aid of a cooling unit, the metal powder in the drying tank is cooled to a temperature that is low enough for drying. It is continuously stirred and dried until the required level of moisture has been achieved. For the drying process to be effective, both the air pressure and temperature in the system must be continuously regulated. Modern vacuum driers are equipped with extensive sensors and programs for fully automated process step regulation.
From the powder drier to the storage tank, the metal powder passes through a system that is hermetically sealed from the ambient atmosphere. This is done to prevent it from absorbing moisture from the ambient air. High-performance metal powder driers dry the powder to a residual moisture level of only a few ppm (parts per million). Despite its high level of effectiveness, the vacuum drying process saves a significant amount of time. 
 

Argon generates a protective atmosphere for safe storage

When the dried metal powder is filled for storage, argon can be used to produce a protective atmosphere. Argon is heavier than air and lies directly on the dried powder, preventing it from reacting with the ambient air or absorbing moisture. Argon is also an inert gas and does not react with the metal powder. To prevent metal oxidation, argon is also used in additive manufacturing processes.
With high-performance vacuum driers, metal powder can be dried without any negative effects on its material properties. The vacuum driers improve powder flowability. They also reduce the number of air inclusions in finished workpieces, which enables higher material densities. Vacuum drying also saves time and requires shorter cycle times.

Our solution POWDRYERTM

The POWDRYERTM PD08 print powder dryer is used to dry inorganic metal powder for the complex additive manufacturing (3D printing) process. 

POWDRYER™

The POWDRYERTM PD08 corrects the manufacturer’s fluctuating metal powder qualities, thus optimizing the metal powder’s flowability. 

Individual consultation appointment 

Our experts will be happy to advise you on the planning and implementation of your projects. Together we will find a customised solution.

ARRANGE A CONSULTATION

More know-how articles

Why winter is favourable to coronavirus and weakens the immune system

Many types of viruses thrive in favourable conditions in winter. They can survive for long periods in the dry, cold air, and people spend more time indoors. On the other hand, our immune system weakens due to the dry air and lack of sunshine. This combination makes coronavirus and other pathogens more dangerous in winter than in summer. However, humidifiers and air purifiers can help to keep us healthy throughout the cold months.

Read Article

Powerful, thorough, quiet: How do air purifiers work?

The filter and fan of an air purifier determine the type and quantity of pollutants it can remove from the room air. Other features such as noise emissions provide information about the locations for which an air filter device is suitable.

Read Article

Correctly positioned air purifiers complement regular airing

The viral load of indoor air can be significantly reduced by regular airing combined with the use of air purifiers. These also make it possible to remove coronaviruses, fine dusts, and bacteria, even in rooms without windows, and in crane driver cabs. In order to achieve an even distribution of purified air, some rules should be observed when setting up an air filter device.

Read Article

HEPA Filters: Using physical tricks to capture particles

HEPA filters are among the most efficient mechanical filters and remove up to 99.995% of contaminants from the air. They rely on the movement characteristics of different small particles to do so. Based on standardised filter classes, inefficient HEPA filters are easily distinguished from HEPA filters that are actually effective.

Read Article

Why room air hygiene should also be given priority after Corona

The Corona pandemic has abruptly brought home to us how air in indoor spaces is often contaminated and dangerous to health. Air purifiers protect us from viruses, fine dust, mould spores and other airborne contaminants that will continue to affect our health and well-being after the current pandemic has been contained.

Read Article

How air purifiers can contribute to improving health protection

The question of whether or not mobile air purifiers reduce the risk of viral disease and can help to improve health protection can be answered with a ‘yes’. That is what the current study by the Institute of Fluid Mechanics and Aerodynamics at Universität der Bundeswehr München has found.

Read Article

Reduce the need for artificial snowmaking with snow cooling units

Artificial snow sysems secure economic viability in many ski regions. At the same time, they attract criticism due to their high water and energy requirements. Snow cooling units offer operators the chance to reduce their artificial snow requirements while saving costs and resources.

Read Article

How powder quality influences printing results

3D printing has developed into a powerful production technology in recent years. Alongside the 3D printing processes based on modelling and photopolymer baths, the powder process has become a commonly used method. Be it metal, plastic, glass, ceramic or composite powder, all powders have one thing in common: their degree of dryness is a key factor for the quality of the printed product.

Read Article
Contact